Spot the mistakes
Guess first, no penalty. You asked AI to convert a drawing dimension from millimetres to metres, and to add three pipe runs for an order. Tap the rows that are wrong before they go on the order.
AI output
0 of 2 found
Recompute before anything is ordered
AI tools often get sums and unit conversions wrong, and they state a wrong total in the same calm voice as a right one.
Recompute every total and conversion yourself, or with a calculator you trust. Write the unit beside every number, then check the unit against the drawing's own note.
A worked example
A prompt is the message you type to the AI. This one asks for the working:
Convert these pipe runs from metres to millimetres, then add them.
Show each step and the unit. Don't round until the last line.
Runs: 2.4 m, 3.1 m, 1.7 m.What if
Change a run and watch the total.
First run
2.4 m
Second run
3.1 m
Third run
1.7 m
Total length
Total length: 7.2 m
An estimate from the numbers you entered, not a forecast.
Change the second run to 3.4 m. The total should move by exactly 0.3 m, to 7.5 m.
Your turn
Fill the gaps
Fill each gap in your check request.
Check request
Convert every length to millimetres, . . Write the unit beside every value, .
Try it
Your steps, about 2 minutes
- 1.Take one set of lengths or quantities from a recent job, or a made-up one. Recompute every total and unit conversion yourself, then compare with what the tool gave.2 min